Fire-Rated PIR sensor
P10 Interior PIR Sensor
P11 Interior PIR Sensor
M11 Recessed Motion Sensor
Remote control
P20 Exterior PIR Sensor
Zhaga PIR Sensor
Zhaga Microwave Sensor
P30 Side-Mount PIR Sensor
M30 Side-Mount Motion Sensor
M31 Side-Mount Motion Sensor
Plug-in Motion Sensor
D20 Exterior Daylight Sensor
Casambi Driver
EasyLINK Wireless Driver and Switches
Dimmable Driver
Driver
5W standard push-in EME module for linear LED luminaire
- Standard/ Self-test push in modular emergency module for Kosnic LED batten luminaires
- Fast and easy installation with no tool required
- Push in the emergency driver to the sockets prefixed to the fitting
- LiFePO4 battery for enhanced life span
- For maintained and non-maintained emergency lighting systems
- Automatic Self-Test (AST) technology conforming to EN 62034
The Emergency Module for LED Batten Luminaires has been designed for easy installation in a range of Kosnic LED batten luminaires. Kosnic LED batten datasheet will state if the luminaire is compatible with this model of emergency module. The emergency module is designed to be installed with the quick-fit tabs in the luminaire and includes a flat 4-pin connector for easy connection to the LED light source and status indicator in the luminaire. The emergency module will adjust the output within the module's limits to the level required to operate the luminaire and ensure an operation time of three hours. The emergency module has a replaceable lithium-ion battery. The Self-Test version of the UEM incorporates AST technology that will perform regular automatic function and duration tests as required by EN 62034, reporting the results via a bi-coloured LED indicator.
Product Description
The Emergency Module for LED Batten Luminaires has been designed for easy installation in a range of Kosnic LED batten luminaires. Kosnic LED batten datasheet will state if the luminaire is compatible with this model of emergency module. The emergency module is designed to be installed with the quick-fit tabs in the luminaire and includes a flat 4-pin connector for easy connection to the LED light source and status indicator in the luminaire. The emergency module will adjust the output within the module’s limits to the level required to operate the luminaire and ensure an operation time of three hours. The emergency module has a replaceable lithium-ion battery. The Self-Test version of the UEM incorporates AST technology that will perform regular automatic function and duration tests as required by EN 62034, reporting the results via a bi-coloured LED indicator.
![Warranty Image](https://kosnic.com/wp-content/uploads/2024/01/2-Year-On-Site-Warranty.png)
![Warranty Image](https://kosnic.com/wp-content/uploads/2024/01/4-Year-Product-Warranty.png)
General Specifications
![Image](https://kosnic.com/wp-content/uploads/2024/01/Internal-Use-Only.jpg)
![Image](https://kosnic.com/wp-content/uploads/2024/01/IP20.jpg)
Recommended/alternatives
No alternativesDownloadables
Technical Summary
-
Dimensions (mm)
150x35x27
-
Battery Capacity
4,000
-
Battery Output Wattage
5
-
Battery Voltage (Vdc)
6.4
-
Test Function
Manual
-
Output Voltage
30-210