Fire-Rated PIR sensor
P10 Interior PIR Sensor-80x80.png)
P11 Interior PIR Sensor
M11 Recessed Motion Sensor
Remote control
P20 Exterior PIR Sensor
Zhaga PIR Sensor
Zhaga Microwave Sensor
P30 Side-Mount PIR Sensor
M30 Side-Mount Motion Sensor
M31 Side-Mount Motion Sensor-80x80.png)
Plug-in Motion Sensor
D20 Exterior Daylight Sensor
Casambi Driver
EasyLINK Wireless Driver and Switches
Dimmable Driver
Driver
M31 Side-Mount 1-10V microwave motion sensor MC054V RC
Product
Code: MWS-SID/DV
- Suitable for basic on-off control or control of 1-10V dimmable luminaires
- Easy to install on Kosnic LED battens and low bay
- Optional daylight harvesting
- Optional stand-by dimming
- Parameters settable by remote control
- Up to 800W inductive load capacity
- Pre-programmed scene selections
- Supports high-sensitivity and low-sensitivity modes (for metal ceilings, metal reflector mounting environments)
- Saves more energy
Product Description
The Kosnic M31 Side-Mounted Motion Sensor adds 1-10v control to M30 Motion Sensor. This while still providing a simple energy saving solution it also adds dimming control, allowing for daylight harvesting and standby dimming if desired. All of these features are quickly configurable using the optional remote control.
Product Description
The Kosnic M31 Side-Mounted Motion Sensor adds 1-10v control to M30 Motion Sensor. This while still providing a simple energy saving solution it also adds dimming control, allowing for daylight harvesting and standby dimming if desired. All of these features are quickly configurable using the optional remote control.
General Specifications
Ambient Temp (°C)
-35°C to 55°C
Install Area
Internal
IP Rating
IP65
Recommended/alternatives
No alternativesDownloadables
Technical Summary
-
Detection radius
9
-
Detection Angle
"150°（wall mount）, 360°（ceiling mount） "
-
Dimensions (mm)
59x∅72
-
Max load resistive (W)
800
-
Max load inductive (W)
800
-
Modes
"On/Off, 1-10V dimming"
-
Mounting Info
Mounting Height 15m Max.
-
Surge protection
"Surge Test L N: 1kV. Output Surge Capacity = 50A (50% lpeak, twidth = 500uS, 230Vac full load, cold start), 80A (50% lpeak, twidth = 200uS, 230Vac full load, cold start)"