Fire-Rated PIR sensor
P10 Interior PIR Sensor-80x80.png)
P11 Interior PIR Sensor
M11 Recessed Motion Sensor
Remote control
P20 Exterior PIR Sensor
Zhaga PIR Sensor
Zhaga Microwave Sensor
P30 Side-Mount PIR Sensor
M30 Side-Mount Motion Sensor
M31 Side-Mount Motion Sensor-80x80.png)
Plug-in Motion Sensor
D20 Exterior Daylight Sensor
Casambi Driver
EasyLINK Wireless Driver and Switches
Dimmable Driver
Driver
4W Universal Emergency Module Pro
Product
Code: UEM04
- Standard/Self-test
- Built-in loop-in loop-out terminals for 2 x 3-core cables
- Built-in cable clamp, push to release
- Loop-in and loop-out push-wire terminals
- Built-in self-test function according to BS-EN-62034-2012
- Designed for use with all LED luminaires (class III) with external driver
- Easy Plug & Play installation
- For maintained or non-maintained emergency lighting systems
- Internal Li-ion battery with improved lifespan
- Easy battery replacement
Product Description
The Universal Emergency Module (UEM) with Automatic Self-Test (AST) is suitable for class III luminaires with integrated LEDs and separate LED drivers. The DC voltage output is adjusted within the UEMís limits to the level required to operate the luminaire load and then the current is Limited to ensure an operation time of three hours. This gives a typical power output of 3W but will depend on the characteristics of the luminaire. The UEM can be installed within a luminaire or within the ceiling void. In the event of a power cut the replaceable internal lithium-ion battery will supply the luminaire through a connection that must be made between the LED driver output and LED luminaire input.
Product Description
The Universal Emergency Module (UEM) with Automatic Self-Test (AST) is suitable for class III luminaires with integrated LEDs and separate LED drivers. The DC voltage output is adjusted within the UEMís limits to the level required to operate the luminaire load and then the current is Limited to ensure an operation time of three hours. This gives a typical power output of 3W but will depend on the characteristics of the luminaire. The UEM can be installed within a luminaire or within the ceiling void. In the event of a power cut the replaceable internal lithium-ion battery will supply the luminaire through a connection that must be made between the LED driver output and LED luminaire input.
General Specifications
Install Area
Internal
IP Rating
IP20
UEM/EME Charging Time (h)
24
Emergency conversion time
1
EME operation time
3
input current (max)
25
Max case temp (°C)
75
Recommended/alternatives
No alternativesDownloadables
Technical Summary
-
Dimensions (mm)
211x91x32
-
Battery Capacity
2,600
-
Battery Output Wattage
4
-
Input Connection
Push-fit terminals 0.5-1.5mm2
-
Output Connection
Push-fit terminals 0.5-1.5mm2
-
Test Function
Manual
-
Output Voltage
24-54