Fire-Rated PIR sensor
P10 Interior PIR Sensor-80x80.png)
P11 Interior PIR Sensor
M11 Recessed Motion Sensor
Remote control
P20 Exterior PIR Sensor
Zhaga PIR Sensor
Zhaga Microwave Sensor
P30 Side-Mount PIR Sensor
M30 Side-Mount Motion Sensor
M31 Side-Mount Motion Sensor-80x80.png)
Plug-in Motion Sensor
D20 Exterior Daylight Sensor
Casambi Driver
EasyLINK Wireless Driver and Switches
Dimmable Driver
Driver
Batten UEM DALI-2, 3W emergency module for Kosnic LED batten luminaires
Product
Code: BEM203/DA
- For maintained or non-maintained emergency lighting systems
- Easy battery replacement
- Designed for easy installation
- Internal LiFePO4 battery with improved lifespan
- With patented adaptive current control, this emergency module is suitable for LED load with a forward voltage between 30 to 300V
- DALI-2 conforming to EN 62386-202
Product Description
The Emergency Module for LED Batten Luminaires has been designed for easy installation in a range of Kosnic LED batten luminaires. Kosnic LED batten datasheet will state if the luminaire is compatible with this model of emergency module. The emergency module will adjust the output within the module’s limits to the level required to operate the luminaire and ensure an operation time of three hours. The emergency module has a replaceable lithium-ion battery. A DALI command from a suitable control unit can be used to initiate function and duration tests at individually selected times. Status flags are set for report back and data logging of results.
Product Description
The Emergency Module for LED Batten Luminaires has been designed for easy installation in a range of Kosnic LED batten luminaires. Kosnic LED batten datasheet will state if the luminaire is compatible with this model of emergency module. The emergency module will adjust the output within the module’s limits to the level required to operate the luminaire and ensure an operation time of three hours. The emergency module has a replaceable lithium-ion battery. A DALI command from a suitable control unit can be used to initiate function and duration tests at individually selected times. Status flags are set for report back and data logging of results.
General Specifications
Install Area
Internal
IP Rating
IP20
UEM/EME Charging Time (h)
24
Emergency conversion time
1
EME operation time
3
input current (max)
40
Max case temp (°C)
75
Recommended/alternatives
No alternativesDownloadables
Technical Summary
-
Dimensions (mm)
220x42x28
-
Battery Capacity
2,000
-
Battery Output Wattage
3
-
Battery Voltage (Vdc)
6.4
-
Test Function
Automatic and Manual
-
Output Voltage
30-300Vdc
-
Output Wattage (W)
3